The AZUD HELIX AUTOMATIC DLP range of DISC filters offers multiple combinations to achieve an efficient and economic filtration solution, which can be adapted to various water conditions in the industrial, HVAC, municipal, environmental, agricultural and landscaping markets requiring very low pressure (21 psi) to backwash.
The DLP option is available with all the standard AZUD HELIX AUTOMATIC filtration range. In addition to the DLP, the filter still uses the patented Azud Helix and Azud Discs to efficiently filter the water. The Helix creates centrifugal action which spins the larger particles away from the discs, and the discs provide a high level of filtration. A determined pressure differential activates an automatic hydraulic backwashing system.
Minimum backflushing pressure for maximum efficiency per filter – only 21 psi requiredDISC FILTRATION. MAXIMUM SAFETY
Its patented design and high quality materials used in manufacturing guarantees an extended life with high resistants.AZUD HELIX SYSTEM
Helix created Centrifugal Action optimizes the filtration performance and reduces backwash frequency and maintenance.SELF-CLEANING FILTERING ELEMENT
Backwashing uses minimal water maintaining an efficient cleaning action. Large filtering surface. AZUD filtration units available from 5 to 500 micron.MODULAR, VERSATILE, COMPATABLE
The system permits a wide range of configurations with a minimal number of components. Vertical or horizontal design.COMPACT ASSEMBLED SYSTEMS FOR EASY TRANSPORTATION AND INSTALLATIONMANUFACTURED IN PLASTIC MATERIALS.
No tools required. Maximum wear resistance of high quality moving parts.
Organic , in-organic, and fibrous
FILTRATION AND BACKWASH OCCUR SIMULTANIOUSLY
Only a portion of the water is used for backwash in multi element systems.
LARGE FILTRATION SURFACE AREA
The discs are available in Multi-Groove (MG) or Wall type depending on the application they are needed for. The MG discs provide depth filtration resulting in very high efficiency at a given micron level.
The width and support structure of the discs provided high resistance to the pressure differential across the filtration surface.
The superior quality of the injection molding of the discs provides uniformity of the discs which results in high efficiency at the selected micron level.
The Helix is a centrifugal action device on the inlet to the filtering element which forces the inlet water to spin around the discs inside the filter housing, this forces the larger particles away from the discs reducing the accumulation of solids on the filtration surface, thus optimizing the performance of the discs and reducing the frequency of backwashing
Video of HELIX EFFECT: http://www.youtube.com/watch?v=iPDAT_3f6Dc&feature=relmfu
AUTOMATIC CLEANING OF FILTER ELEMENTS
Filtration Stage: The Helix generates a centrifugal helical effect upon entry into the filter, this moves the particles away from the discs. The water then passes efficiently through the depth of the uniquely designed discs.
Backwashing Stage: The clean water from the down stream side of the filter elements is introduced from the reverse direction through the backwashing filtering element. This hydraulically decompresses the stack of discs, allowing the discs to separate and backwash efficiently.
The solids are expelled from the discs and evacuated through the backwash manifold.
The filtration process then restarts with the compression of the discs.
The backwash is controlled by two valves and a controller, which integrate the
filtration equipment. The backwash is initiated by pressure differential or time.
No tools required. Very few warring parts
MANUFACTURED IN PLASTIC
The patented design and the materials used in manufacturing the filters guarantee a long life with high resistance.
The maximum operating pressure and temperature of the standard equipment is 145 psi at 140⁰F.
WATER AND ENERGY SAVINGS
Amount of water used during backwashing cycle is significantly less than with other types of automatic cleaning filters. Time between backwashing cycles is increased by the design of the Helix system.
All products go through stringent quality control before leaving the factory.
Pressure Required for Backwash: Min 21 psi with 39 gpm – 2
Available in 4” through 12″, with flows up to 5000 gpm (with 130µ discs).
Maximum Operating Pressure: 145 psi
Maximum Operating Temperature: 140⁰F
Disc options – 5µ, 10µ, 20µ, 50µ, 100µ, 130µ, 200µ and 400µ.